Protective heat-resistant coating
Physical and chemical parameters
|
Parameter name (for powder) |
Indicator value for grades |
|
|
ZP-1 |
ZP-2 |
|
|
Mass fraction, %: Al2O3, NLT Fe2O3, NMT |
36 4 |
28 - |
| Relative change in mass on ignition, %, NMT |
5 |
3 |
| Weigh fraction of moisture, %, NMT |
5 |
5 |
|
Operating characteristics |
Indicator value for grades |
|
|
ZP-1 |
ZP-2 |
|
| The time of the coating usability after mixing the components, h, NMT |
8 |
12 |
| Coating consumption per 1 m2 with a minimum layer thickness of 5 mm, kg |
7 |
5 |
| Recommended layer thickness, mm, within |
5-8 |
3-5 |
| Total curing time (minimum), 24 hours |
1 |
1 |
| Тemperature during coating application, °C, NLT |
15 |
15 |
| Аpplication temperature, °С, not exceeding |
1450 |
1300 |
The ZP-1 grade coating consists of two components and is supplied in the form of dry powder and liquid binder.
The coating components are mixed immediately before use in a powder to binder ratio of 60:40, respectively.
The ZP-2 grade coating is supplied in the form of dry powder and is produced immediately before use in a powder to water ratio of 78:22, respectively.
The powder included in the coating of all grades shall not contain any foreign inclusions.
The ZP-1 grade coating acquires operational characteristics after preliminary drying at a temperature of at least 150 °C for one day, the coating of the ZP-2 grade acquires operational characteristics after firing at a temperature of 1,100 °C.
Regulatory documentation: STO 05802307-6-003-2021
Contact us
How to order
To place an order for the product supply, please do the following:
- On your company's letterhead, fill out an application, which shall include:
- name of the requested product (or technical specifications thereof),
- required amount,
- estimated delivery time,
- contact details.
- When ordering non-standard products (according to drawings), please attach the drawings of the requested product and indicate the dimensional tolerances.
- The completed application and drawings can be sent:
- by email: tdom@slsoz.ru
- by fax: (34373) 64 3 42; 64 4 63
- or use the feedback form on the right